EZWaterFlo Shower Cleanse 3 Directions for Install and Use ![]() Turn the switch sideways on the EZWaterFlo adapter. This will cut the flow of water from the shower head to a trickle. Stand inside the shower, and before inserting the Syringe, check water temperature. If your house water system is subject to temperature changes when water is used in other parts of the house at the same time, you should notify everyone in the house not to use water during your enema time, (i.e. Dishwasher, laundry, shower, etc.) The enema tip we use allows a gentle flow of water, no matter how hard the faucet is turned on.
1. Lubricate the tip with soap or other lubricant you prefer. Stand in shower and check water temperature again. Then use the shut off switch on the enema handle. Remove the enema extension hose from the handle. 2. Bend over, insert tip, then plug the hose back into the handle. Turn on switch and allow the water to flow until you feel full. Then turn the handle switch off (water off), wait 30 seconds, until you feel the water clearing the blockage. You will feel a relief of the "fullness" pressure. Turn switch on again, taking in more water. Then remove enema and go to stool, until all water is released. 3. Start over from step #1 and repeat until you reach the high enema. After a few enemas, you will learn to read and understand what is happening in your body. 4. How often should you enema? Some of our customers enema once a week, others say, when they feel congested. For people who have a problem with constipation, the enema waterflo will make the bowel movement comfortable. Cleanseing the colon helps remove bacteria that causes diarrhea. 5. People who do a water and / or juice fasting for several days, should enema every day of their fast. This removes the toxins in the colon that are created by the fasting. How to set-up and administer Remove existing showerhead. Then screw the showerhead onto the EZWaterFlo adapter, which already has teflon Plumber's tape around the threads. The other piece of teflon plumber's tape (inside pkg.) should be placed around the threads of the shower pipe coming out of the wall. Now screw the EZWaterFlo adapter to the pipe coming out of the wall. Decide where you want the placement of hooks. Place hooks approximately 10 to 12 inches on either side of the Shower, preferably on tile.
You are now ready to use the OraKitCare, the enema, or the douche! EZWaterFlo Shower Combo Kit Snaps on your shower head with instant ease. The penetrating power of controlled water tempurature and pressure makes EZWaterFlo's syringe the most efficient hygienic instrument ever developed. |
||
copyright© 2008 EZWaterFlo.com all rights reserved |
||